The dust extraction arm supplier is composed of air inlet pipe, air exhaust pipe, box, ash hopper, ash cleaning device, diversion device, air flow distribution plate, filter cartridge and electronic control device, similar to the air box pulse bag dust collection structure. The layout of the dust extraction arm supplier is very important. It can be arranged vertically on the box flower plate or tilted on the flower plate. From the perspective of the dust removal effect, the vertical layout is more correct. The lower part of the flower plate is the filter chamber, and the upper part is the air box pulse chamber. An air flow distribution plate is arranged at the inlet of the dust collector.

When the dust extraction arm supplier is working, we are not allowed to open its lid casually, which is not allowed. When we need to adjust the cleaning time of the machine or check the circuit, the power supply needs to be cut off. In order to be able to work normally, dust cleaning work should be done. The cleaning time can be determined according to the capacity of dust, generally a class to clean three or four times. When we are in the dust, we need to stop the machine and open the sealed door for cleaning.

The following is the daily operation process of the dust extraction arm supplier:

First, discharge clean flue gas: the purified air flow through the bag room into the water film dust removal desulfurizer;

Second, dust bag ash interception: dust containing gas into the filter bag, a large amount of dust is intercepted on the filter bag, and the air flow through the filter bag to achieve purification;

3. dust extraction arm supplier cycle ash filtration: the control system then opens other solenoid valves to clean other filter bags. After all filter bags go through the dust cleaning cycle, the purpose of dust removal is achieved, and the dust collector recovers the filtering state;

4. Recovery filtration: After backblowing, the solenoid valve is closed, the cleaning operation of the system is completed, and the filter bag is restored to the filtration state;

Fifth, ash hopper ash removal: ash removal device and dust collector run at the same time, should be cleaned in time, ash hopper as far as possible not to accumulate ash, otherwise it will affect the service life of the filter bag;

6. Air backblowing: With the thickening of the dust attached to the surface of the filter bag fabric, the resistance of the dust extraction arm supplier continues to rise, and it is necessary to clean the ash regularly. The whole cleaning process is mainly completed by the action of high-pressure gas storage bag, solenoid valve, blowpipe and cleaning control mechanism. First, the control system automatically opens the solenoid valve in order, and the high-pressure air is blown back through the spray pipe, so that the dust adhering to the dust bag is washed and shaken off into the ash hopper;

7. dust extraction arm supplier induced draft fan inhalation: In normal operation, under the action of the induced draft fan, the dust-containing gas is sucked into the intake main pipe and evenly distributed to each intake chamber through each intake branch pipe.

The motor and fan of single pulse dust collector are arranged in the upper shell, the dust filter bag, the drop hopper and the dust catcher are arranged in the lower shell, the dust filter bag is installed between the upper shell and the lower shell, the dust filter bag is connected with the dust filter frame, and the elastic sealing pad is provided between the frame and the dust filter frame, the vibration motor is connected with the dust filter frame through the vibration mechanism, the air inlet is arranged on one side of the lower shell, and the air outlet is arranged above the upper shell. The motor and vibration motor are respectively connected with the electric control box. The dust collector has the characteristics of compact structure, easy operation, low noise, good dust removal effect, and can be directly applied to small places and laboratories.

dust extraction arm supplier https://www.kaisenfilter.com/Suspended-Suction-Arm