Dolphin pool cleaners are a popular choice for pool owners. These robotic cleaners can be expensive, but they are very efficient. They are also very easy to use. However, there are some problems that may occur from time to time.
One of the most common problems is that the dolphin cleaner will turn on but will not move. This can be a frustrating problem to deal with.
Motor
Dolphin Robotic Pool Cleaners are some of the best on the market, but they do have their issues. They may start up and stop randomly or just seem to not do their job well. This guide is intended to help troubleshoot common problems and give you tips on how to fix them.
First, make sure the power light is on and the cleaner is plugged in. Then check for obstructions such as dirt, debris, or leaves blocking the hose and intake valve. If you find any blockages, remove them.
If your Dolphin pool cleaner can’t climb the walls, ensure that the Rapid Drain Flap is not missing or stuck – these create a seal that allows them to climb (you can view this by turning the unit upside down). If the model has white Climbing Rings, let them soak in water (5 – 10 minutes) to soften and allow them to grip the wall.
If your Dolphin Pool Cleaner is still not cleaning or working properly, disconnect the power supply and inspect it for dirt or debris that might be preventing the motor from running correctly. If the motor is damaged, it will need to be replaced.
Tracks or Treads
The tracks or treads on a dolphin pool cleaner are what make contact with the pool surface and are used to propel it forward. If these are worn out or damaged, the cleaner will not be able to move. Examine them for signs of wear or damage and make sure that they are not blocked by debris such as a twig.
Efficient Performance Is a Way of Life
Dolphin engineers built Premier with a sharp focus on efficient performance to deliver the most advanced tile and waterline robot ever. With dual high-output motors, it has undeniable power to get where other robotic cleaners cannot — under ladders, in corners, and above the waterline. Smart scanning and navigation software provide highly optimized coverage for a new level of cleaning efficiency. And Multi-Media filtration captures fine debris and biofilm that standard filters miss. Only Dolphin offers this advanced technology.
Power
Dolphin pool cleaners are built to last and can often withstand years of regular use. However, like any robotic machine they can experience problems from time to time that may require a repair or replacement part.
If your Dolphin has stopped working, first check the power supply unit to see if it has any bare wires or is damaged in any way. You can also use a voltmeter to check the voltage of the motor and brushes.
Most of the time, a Dolphin will simply turn on and go to work. However, this is not always the case and it can be frustrating to find that your Dolphin is not working as intended. Luckily, this troubleshooting guide will provide you with some possible solutions to these issues and get your Dolphin back up and running.
Impeller
Dolphin pool cleaners are among the best in the industry, but they’re not without their faults. If your dolphin robot starts but then stops randomly, it may be an issue with the impeller, tracks or motor. If you suspect that any of these are the case, Advanced Spa And Pool is a Maytronics Warranty Service Center and can help with troubleshooting and repair.
The first thing you’ll want to do is check the filter basket. Some Dolphin models will stop running if the basket is full. This can happen if the computer sensors take a moment or two to register that it is full. Empty the basket and try again.
If the problem persists, you may need to remove the unit from the water and inspect the tracks or treads for obstructions. Large debris like rocks, sticks and leaves can clog up these parts and prevent them from moving. If you find any clogs, clean or replace them as needed.
